HC04 Hoist Controller

Description

NEXT StageLIFTS can be controlled with stand-alone hoist controllers, The NSL-HC04 is a stand-alone hoist controller that connects up to 4 motor hoists. A dedicated controller for all popular direct-controlled chain hoists.

The main feature of the standard NSL-HC04 unit is the link option for up & down and E-STOP buttons, this enables easy to control for a larger number of hoists, simultaneous start and stop control on the up/down buttons, and centralizes the emergency stop button.

The controller is also equipped with switches for the selection of single-inverted channels, MPA: Manual Phase Align circuit breakers protect all outputs, in case of emergency all 3 phases and the neutral are disconnected.

Mains input (3x 32A, 5wire), equipped with CEE (3P+N+E) 32A inlet plug.

Linking Controllers
Several units can be linked in master/slave using the link in/out on the back panel. Easy to control for a large number of chain hoists with simultaneous hoist control using the Up/Down buttons on the master controller as well as a centralized emergency stop on the master controller.

Circuit breaking & power 

• 1 x 16A 4pole circuit breaker protects ALL outputs, in case of emergency all 3 phases AND the neutral are disconnected
• 1 x C16 (16A – 1P+N) 2-POLE automatic circuit breaker for control circuit
• Mains input cable (3x 32A, 5wire), equipped with CEE (3P+N+E) 32A inlet plug