The NA-RB234(B)-PF is a so-called hanging adapter (Gizmo). It is designed to connect trusses via a shackle to a steel, chain, or chain hoist. It is designed for use with a broad range of our products: NH24, NSR36, NX/NH3x,NHR44, 296-300 mm product, NX/NH4X, NHR/NSR52. For the NS52 truss you can use the NA-RB500(B)-PF

The construction consists out of a solid aluminum square bar with half couplers and a special eyebolt/lifting eye which can rotate 360 degrees.  The half couplers can be repositioned to match the right position for the truss that needs to be connected. The WLL of the product is 1.500 kg, and 750 kg with DGUV Vorschrift 17/18 (BGV C1).

Assembly and operating instructions

The product is delivered as shown above, If required, the half couplers can be reversed to perform the usage following the example on the right. All detachable connections must be checked and secured against self-loosening. To change between the variants the truss half couplers need to be rotated to the other side, loosen the self-locking nuts M12, remove the bolts, and re-install the half couplers to the opposite side of the square profile.

The eyebolt can’t be removed or replaced, it is fixated in its position.