NT40 Tower System

NT40 Tower System

The NT40 Tower system is an excellent system to allow safe & quick lifting of NS52 or NBR100 rigs. The NT40 Tower is based on NST44 Truss which has 50×4 main tubes and 25×3 mm bracing, these mast sections are equipped with horizontal bracing on one side for easy climbing of the towers.

More information

Facts

  • Can be used for NS52 and NBR100 truss rigs
  • Multifunctional for use with manual and motorized hoists
  • Up to 16 meters
SKU
NT40 Tower System
Coupling Systems

NC1

Height

16.00 m / 52 ft

Product information

The NT40 Tower system is an excellent system to allow safe & quick lifting of NS52 or NBR100 rigs. The NT40 Tower is based on NST44 Truss which has 50×4 main tubes and 25×3 mm bracing, these mast sections are equipped with horizontal bracing on one side for easy climbing of the towers.

The NT40 Tower is suitable for both NS52 and NBR100 sleeve blocks. Both sleeve blocks are based on a corner block without bracing on the top and bottom, instead of this sleeve plates are mounted on top and bottom. In these sleeve plates, wheels are mounted for sliding the block over the mast sections. In addition, holes are provided for the dead hanging of the construction. The base can be equipped with short or long outriggers, and the top section is suitable for motor hoists.